KeeneticOS 4.2

What’s new?

Welcome to KeeneticOS version 4.2! As usual, we have several performance improvements and bug fixes, but our main focus for this update is to introduce the new Web Interface and further improve support for the IPv6 protocol in various KeeneticOS services.

The new Web Interface has a refreshed look, with light and dark themes to choose from, and carefully selected usability enhancements. We've moved to an updated framework that supports modern security enhancements.
It is now possible to update KeeneticOS on all devices in the Wi-Fi system with a single click. In addition, the Autoupdate function automatically manages the updates of the connected extenders according to the schedule of the main router.
Clients connecting to the Home segment of the network are now automatically registered by default, improving security and ease of management.
The new Segment Default Policy option improves Internet access management for network clients. By default, a registered client will follow the connection policy associated with the network segment it is connecting to. For example, you can set up a separate Wi-Fi network at home with the same name as your office network and route its traffic to a VPN connection to your office. Then, when working from home, simply switch to the office Wi-Fi network to teleport immediately.
The new OpenConnect VPN server and client are now available. Connect networks or access your network remotely using free applications available for Android or iOS.

KeeneticOS 4.2.3

20/11/2024

New

Improved

The improvements have been applied to the Web interface.
- Improved the Active Connections table. [NWI-3703]
- Changed colours on the Traffic monitor charts for better visibility and contrast. [NWI-3699]
The maximum Username length for Proxy connections increased to 128 characters. [NDM-3512]
The DDNS service now re-attempts to update the Domain name resolution 30 seconds after a failed attempt. [NDM-3513]
Enabled LLDP multicast in addition to broadcast announcements to improve compatibility with managed Ethernet switches. [SYS-1214]

Fixed

Fixed an issue where the SFTP connection to the SFTP Server would hang after transferring 476 megabytes. [SYS-1240]
Fixed a KeenDNS issue with Internet access to web applications with the No access (security-level private) setting enabled. [NDM-3479]
Fixed an issue with setting speed auto mode for SFP/MDI combo port. [NDM-3537]
Fixed an issue with the OpenConnect VPN client reconnecting when the remote OpenConnect VPN server is restarted. [NDM-3532]
The following fixes have been applied to the Web interface.
- Fixed problem where System Dashboard cards were not editable on mobile screens. [NWI-3865]
- Removed domain-specific DNS entries from the Signal levels dialog. [NWI-3784]
- Fixed an issue with downloading of packet capture files when using a USB drive as a storage location. [NWI-3790]
- Optimized the internal logic of the System log popup window. [NWI-3813]
- Fixed tooltip display for Static IP fields. [NWI-3818]
- Fixed the view mode selector behaviour on the Applications page. [NWI-3827]
- Fixed JS errors on the General System Settings page. [NWI-3840]
- Fixed the display of the Media library folder path for the Media server application. [NWI-3852]

The following fixes have been applied to the Web interface.
- Fixed the position of the Other management options link on mobile devices. [NWI-3722]
- Fixed an issue where the USB disk would disappear from the USB Devices section when unmounting all partitions. [NWI-3762]
- Fixed tooltips for Wi-Fi toggles on Extenders in the Mesh Wi-Fi system. [NWI-3763]
- Fixed the scrollbar colour for the Dark theme. [NWI-3764]
- Fixed the scrolling on mobile devices. [NWI-3768]
- Fixed Applications availability conditions. [NWI-3770]
- Fixed JS errors when a segment's configuration page is open. [NWI-3779]
- Fixed line wrapping when menu is expanded. [NWI-3780]
- The placement of the Bandwidth control header on the Connection Policies page has been corrected. [NWI-3781]
- Fixed the colour of the operating mode radio buttons. [NWI-3714]
- Fixed the Wi-Fi Channel number configuration and notifications when using Wireless ISP (WISP). [NWI-3698]
- Fixed the USB modem status display. [NWI-3707]
- Fixed the DHCP Address pool size calculation. [NWI-3720]
- Fixed the highlighting in the Ports and VLANs Settings section when editing settings. [NWI-3789]
- Fixed removal of the DNS server for the WireGuard VPN connection. [NWI-3800]
- Fixed incorrect display of 802.1x Authentication settings without component installed. [NWI-3822]
Fixed communication with remote NTP time server via IP alias. [NDM-3417]
An issue that caused the sent too big header while reading response header from upstream error message to appear in the System log when accessing the web applications via KeenDNS. [NDM-3480]
Resolved a software packet engine (ppe software) incompatibility with incoming traffic having TTL 1. [NDM-3490]
Fixed removing the DNS (ip name-server) record with the default port. [NDM-3493]
Fixed listing of Ethernet connections. [NDM-3504]
Fixed an issue that caused the Bridge: wrong port index error message to appear in the System log when displaying the Client lists page. [NDM-3514]
Fixed saving of Server address field with "camouflage" suffix in SSTP VPN client settings. [NDM-3521]
An issue that caused the https-dns-proxy: curl needed more event than max connections error message to appear in the System log has been fixed. [NDM-3523]

KeeneticOS 4.2.1

11/10/2024

New

The new public DNS resolver presets from ControlD are now accessible on the Internet Safety page. [NDM-3452]
The opkg disk command line interface (CLI) has been augmented with a new URL option, which enables downloading of the remote OPKG installation archive. [NDM-3453]
- opkg disk ({disk} | {disk}) [{url}] — set {url} of the remote OPKG archive.
  For example: opkg disk storage:/ https://bin.entware.net/aarch64-k3.10/installer/aarch64-installer.tar.gz
A standalone Policy Table mode has been implemented, which disables the automatic addition of static routes to the selected connection policy. [NDM-3445]
- ip policy {name} standalone — enable standalone mode for connection policy {name}.
WireGuard client connections now select a random listen port each time the tunnel reconnects. [NDM-3469]

Added a CLI command to unbind the DDNS service requests from the specified interface. [NDM-3420]
- interface {name} dyndns nobind — disable DynDNS bind on interface {name}.
Implemented a CLI command to enable the sending of the client ID for the WireGuard connection peer. [NDM-3427]
- interface {name} wireguard peer {peer} client-id send {value} — set client-id as a decimal {value} of the required hexadecimal ID for Wireguard {peer}.
Added a CLI command to configure the authgroup value for the OpenConnect connection to ensure third-party compatibility. [NDM-3430]
- interface {name} openconnect authgroup {authgroup} — set the {authgroup} value to use with OpenConnect interface {name} connection.
When accessing the Internet over the tunnel, clients of IKEv1/IPsec and IKEv2/IPsec VPN Server applications now follow the connection policy selected for the bound network segment. [NDM-3431]

You can now assign Network ports on Extender devices to any configured network segment using the Command Line Interface (CLI). Alternatively, you may wish to disable the Network ports for security reasons. [NDM-3162]
- mws member {member} port {port} [no] access {interface} — assign {port} on a {member} node to access an {interface} segment;
- mws member {member} port {port} [no] disable — disable {port} on a {member} node.
Enhanced software packet processing engine to enable acceleration for traffic with a manually set TTL value. [SYS-1157]

The new IntelliQoS option allows 802.1p priority code point (PCP) mapping for egress packets in the command line interface (CLI). [NDM-3318]
interface {name} vlan qos egress map {priority} {pcp}
- {priority} — NTCE priority queue number. Use 0 to assign the same PCP value to any outgoing packet on the interface;
- {pcp} — set the new value of the 802.1p priority code point.
The implementation of a ZeroTier connection now includes accepting managed routes and DNS servers published on the ZeroTier network controller. [NDM-3319]

A new CLI grep extension is now available to filter the output of the show command. [NDM-3075]
- grep [-A <n>] [-B <n>] [-C <n>] regex — trim the show command output using the regex regular expression.
  -A — number of XML nodes to show after match.
  -B — number of XML nodes to show before match.
  -C — displayed XML cluster depth.
For example:
```
(config)> show interface | grep address

Interface, name = "Home"
          address: 192.168.2.1
             ipv6:

Interface, name = "Guest"
          address: 10.1.30.1
             ipv6:

(config)> show system | grep cpuload

          cpuload: 5
```

A new segment default policy for hosts has been implemented and is now enabled by default. Registered devices with this connection policy assigned will follow the default connection policy of the network segment they are connecting to. [NDM-2237]
- ip hotspot host {MAC} conform — set host with specified {MAC} to follow the current segment's connection policy.
The new application filtering option is now available in the Application traffic analyser service via command line interface (CLI). This option allows to create a filtering profile, add required applications, assign a host or segment to the filtering profile and enable the operation schedule. [NDM-3069]
- ntce filter profile {name} application {application} — add an application to the profile.
- ntce filter profile {name} group {group} — add an application group to the profile.
- ntce filter profile {name} type {type} — set the profile type, which can be permit or deny.
- ntce filter profile {name} description {description} — set the profile description.
- ntce filter profile {name} schedule {schedule} — set the profile schedule.
- ntce filter assign host {host} {profile} — assign a profile to a registered host (MAC address).
- ntce filter assign interface {interface} {profile} — assign a profile to an interface.
The new option to automatically register hosts in the Home segment is now available (enabled by default). You can disable this behaviour using the command line interface (CLI). [NDM-3101]
- ip hotspot auto-register disable — disable automatic host registration for the Home segment.
The new OpenConnect VPN server system component is now available, providing a remote SSL VPN connection to your Keenetic. [NDM-3141]
- oc-server interface {interface} — bind OpenConnect server to an interface.
- oc-server pool-range {begin} {size} — set OpenConnect address pool.
- oc-server static-ip {name} {address} — set static IP address for a user.
- oc-server mtu {mtu} — set OpenConnect server MTU.
- oc-server multi-login — enable multiple connections with the same user account.
- ip nat oc — enable NAT for OpenConnect clients.
- service oc-server — enable OpenConnect service.
The Keenetic Phone Station system component now supports the filtering of incoming calls. [VOX-271]
- nvox sip {id} whitelist {digitmap} — create whitelist for SIP {id} with specified {digitmap};
  for example: nvox sip 1 whitelist +1111x.|+2222x.|2389x.|32756 — allows phone calls with numbers starting from +1111, +2222, 2389 and an 32756 number.
- nvox sip {id} blacklist {digitmap} — create blacklist for SIP {id} with specified {digitmap};
  for example: nvox sip 1 blacklist +3333x. — block phone number starting from +3333.
- nvox sip {id} enable-whitelist — enable whitelist for SIP {id}.
- nvox sip {id} enable-blacklist — enable blacklist for SIP {id}.
- show nvox sip {id} whitelist — display allowlist settings.
- show nvox sip {id} blacklist — display blocklist settings.
The Keenetic Phone Station system now supports import of the phonebook from a file. [VOX-326]
- nvox phonebook import {filename} {mode} — import contacts in the vCard format.
  - filename — *.vcf filename;
  - mode — import mode: replace, overwrite, extend, or duplicate.
- nvox phonebook delete — delete all contacts from the phonebook.
- nvox sip {id} enable-whitelist-phonebook — enable phonebook as an allowlist filter for incoming calls.
- show nvox phonebook — display all phonebook records.

Improved

Improved host detection using EchoReq in the ICMPv6 protocol to ensure correct operation of port forwarding rules for the IPv6 protocol. [NDM-3265]
Optimized the memory consumption of the SMB file and printer sharing system component when using the Cx File Explorer mobile application. [NDM-2927]
Added SMS subsystem support for Fibocom FM350 and Quectel RM500U modem modules. [NDM-3267]
The Phase 2 of the site-to-site IPsec tunnel now supports the SHA512 HMAC algorithm. [NDM-3269]
- crypto ipsec transform-set {name} hmac esp-sha512-hmac — enable esp-sha512-hmac algorithm for transform-set {name}
Added MAC address and registration time information to the name of devices registered automatically. This will help you easily identify and keep track of the devices on your network. [NDM-3253]

A new read/send timeout option allows the session lifetime for Web applications of the KeenDNS proxy service to be set via the command line interface (CLI). [NDM-3157]
- ip http proxy {name} timeout {timeout} — set {timeout} for KeenDNS {name} proxy.
The WireGuard advanced security configuration (ASC) parameters are now available in the command line interface (CLI). [NDM-3202]
- interface {name} wireguard asc {jc} {jmin} {jmax} {s1} {s2} {h1} {h2} {h3} {h4} — set additional ASC parameters for WireGuard {name} tunnel.

Disabling Port Forwarding (ip static) rules now forces matching active sessions to be dropped. [NDM-3067]
Implemented new options to preserve Referer and Origin headers for Web applications of the KeenDNS proxy service in the command line interface (CLI). [NDM-3089]
- ip http proxy {name} preserve-referer — preserve Referer header for {name} of the web proxy rule.
- ip http proxy {name} preserve-origin — preserve Origin header for {name} of the web proxy rule.
A NetFlow monitor system component can now collect IPv6 traffic information and monitor network flows. [NDM-3109]
The MOBIKE extension (RFC 4555) has been enabled for both the IKEv2/IPsec VPN Server and the IKEv2 client. [NDM-3164]

KeeneticOS 4.2

KeeneticOS release notes for Keenetic Ultra (KN-1810) in the Main Channel

What’s new?

KeeneticOS 4.2.3

New

Improved

Fixed

KeeneticOS 4.2.1

New

Improved

Fixed

Search results

KeeneticOS updates — Main Channel

KeeneticOS 4.2

KeeneticOS release notes for Keenetic Ultra (KN-1810) in the Main Channel

What’s new?

KeeneticOS 4.2.3

New

Improved

Fixed

KeeneticOS 4.2.1

New

Improved

Fixed

Search results