KeeneticOS updates — Dev Channel

The new country option for Israel is now available in the 5 GHz Wireless Network settings. [SYS-687]

The Quectel RM520N-GL 5G/4G LTE Cat 19 modem module is now supported. [SYS-698]

The Keenetic mobile app no longer shows the New network client: ... message when a wireless client fails to connect to the Wi-Fi. [NDM-2510]

The pop-up for VPN statistics now displays correctly on mobile phone screens. [NWI-1481]

The Scan the network option on the Wi-Fi monitor page now displays the scanning result correctly. [SYS-679] [Forum topic]

Changing settings of a wired interface no longer excludes it from the connection policy in the Connection priorities menu. [NWI-1488] [Forum topic]

The L2TP/IPsec VPN connection reconnects correctly after an Internet connection recovery. [NDM-2507]

The new Multi-AP backhaul compatibility option for Range Extender mode allows extension of the wireless coverage of a non-Keenetic Mesh enabled device that requires transmission of Wi-Fi data frames in the 4-address format. [NWI-1468]

The validation of occupied IP addresses on the Device lists page now works as before. [NWI-1456]

The link position of the edit schedule displays appropriately on mobile screens. [NWI-1463] [Forum topic]

The network topology picture from the Extender mode now displays correctly on mobile screens. [NWI-1477]

The AFP file sharing system component is updated, fixing the CVE-2022-23125 vulnerability. [SYS-681]

Fixed AFP file sharing service restart under certain conditions. [SYS-688]

The L2TP/IPsec VPN server configuration now applies as expected. [NDM-2495]

Additional USB modems are now supported, including:

The MiniUPnPd service no longer restarts after a DHCP lease update on a WAN connection. [NDM-2459] [Forum topic]

The authorization of Windows clients has been fixed for the captive portal Spot4 service. [NDM-2383]

Changing the state of the underlying interface for WireGuard VPN no longer causes a system reboot. [NDM-2424]

Restored L2TP/IPsec VPN server interoperability with common smartphone and desktop clients. [NDM-2433, NDM-2468] [Forum topic]

In the case of switching from backup to the primary WAN connection, network sessions are cleared, ensuring correct routing via the primary connection. [NDM-2456]

DNS content filter assignments now apply correctly after the device restart. [NDM-2457]

Compatibility of the MTS 824FT (Hilink) USB modem is now restored. [NDM-2470]

The Transit requests option now works as expected. [NDM-2479]

Mobile data connection from a smartphone via the Android USB Tethering technology now operates properly. [NDM-2485]

Added support for the Dell DW5829e 4G LTE Cat9 USB QMI modem module. [NDM-2400]

The calculation of the RSSI value for Fibocom L850-GL/L860-GL USB modem modules has been improved. [NDM-2416]

The OpenSSL library is updated to the latest version 3.0.7, fixing the CVE-2022-3602 and CVE-2022-3786 vulnerabilities. [SYS-669]

The logo alignment has been fixed for the Login page on mobile screens. [NWI-1387] [Forum topic]

Fixed the inline position of the Update channel information section on the System dashboard page. [NWI-1388] [Forum topic]

The Transit requests option now operates correctly for all available DNS resolution profiles. [NDM-2403]

The cause of periodic VPN IKEv2 tunnel disconnection has been fixed. [NDM-2413]

The text style of the Confirm button is changed so that the text description is better placed for all languages in mobile view. [NWI-1449] [Forum topic]

The OpenVPN client and server system component with the new 2.6 version no longer requires an installed IPv6 system component for operation. [NDM-2441]

The new Fail-safe configuration mode lets you change Keenetic's settings from anywhere without worrying that you'll lose control by choosing the wrong settings. If a remote management session terminates abnormally, the device will automatically reboot in three minutes, and undo the changes. [NWI-1429, NDM-1945, NDM-1844]

Internal Firewall rules have been updated to allow usage of the DHCPv6 relay agent. [NDM-2410]

The connection toggles On/Off on the Other connections page have been fixed, providing better responsiveness. [NWI-1419]

The LLDP service does not cause the Service: "Link-layer discovery observer": unexpectedly stopped. unknown option "a". error message in the System log. [NDM-2409] [Forum topic]

The new relay multicast DNS (mDNS) option is now available in segment settings allowing transmission of mDNS messages between all segments. [NWI-1368]

We have addressed the broken Wi-Fi LED indication for when all 2.4 GHz interfaces are turned off. [SYS-642]

The Wi-Fi channels used by Keenetic itself are highlighted now on the diagram and table on the Wi-Fi monitor page. [NWI-1389]

Disable the use of DNS servers from the mobile operator for the UsbQmi and UsbLte modem interfaces by using the CLI command no mobile name-servers. [NDM-2374]

The menu titles are now visible in the mobile Web Interface. [NWI-1377] [Forum topic]

The Save button was missing when editing the speed limit setting; this has been fixed. [NWI-1390]

The SMB file and printer sharing component is compatible with the new OpenSSL 3.0 library. [SYS-627]

The Wake-on-LAN (WoL) option now works properly in network segments with security-level protected settings. [NDM-2385] [Forum topic]

Resolves the issue of duplicate entries in the system's routing table. [NDM-2391]

Restored connection to the mobile network for the Huawei E3372h-153 4G USB modem. [NDM-2395] [Forum topic]

Additional USB modems are now supported, including:

When an active dual-stack IPv6 connection is present, KeenDNS IPv4 access in the Direct mode operates correctly. [NDM-2378]

The Download Station now operates properly with an encrypted connection after the updating of OpenSSL to version 3.0.5. [SYS-631] [Forum topic]

The root CA (Certificate authority) certificate validation has been fixed for legacy Keenetic devices. [SYS-632] [Forum topic]

The Fast Leave option provides a quick switch between IPTV channels via an IGMP proxy when supported by the ISP. [NDM-2375] [Forum topic]

You can use the following command in the CLI:

The OpenSSL library has been updated to version 3.0.5. [SYS-628]

The IPsec service management has been revised to improve stability and operation under heavy system load. This should prevent the system failed [0xcffd00ac], code = 255 error from appearing in the System log. [NDM-624]

The radio signal metrics of Huawei modems, such as SINR, RSRP, and RSRQ, are now displayed correctly. [NDM-2371] [Forum topic]

On the Connection priorities page, the new colour-coded states option will display the current state for each connection. There are three colours available: [NWI-1326]

The new Enable multipath option is now available on the Connection priorities page. You can automatically balance the throughput among included connections by switching the custom Connection Policy to the Multipath mode. [NWI-1328]

On the General system settings page, there is now a checkbox that allows you to enable the SNTP service for the local network. [NWI-1330]

The Wi-Fi monitor page has received several design improvements and changes. [NWI-1325]

Backward compatibility with the Europe/Kiev time zone was added after it was renamed to Europe/Kyiv. See Release 2022b - 2022-08-10 notes. [NDM-2362]

The embedded File browser in KeeneticOS now includes a scrollbar, which provides a better user experience with multiple file upload tasks. [NWI-1356] [Forum topic]

The positioning of tooltips and tables in the Web Interface has been changed to provide a better view on screens with 1366x768 resolution. [NWI-1365]

We have addressed the broken Wi-Fi LED indication, which was present in the previous 3.9 Alpha 6 firmware. [SYS-615] [Forum topic]

The DHCPv6 stateless mode now operates correctly and propagates DNS server information to DHCPv6 clients. [NDM-2363] [Forum topic]

The new SNTP (Simple Network Time Protocol) server feature provides time synchronization for your LAN applications. [NDM-2338]

Use the following CLI command:

Both DNS-over-TLS (DoT) and DNS-over-HTTPS (DoH) now support the IPv6 protocol. [NDM-2344]

NextDNS content filtering now uses the IPv6 protocol when available. [NDM-2345]

The Internet Checker service (show internet status) now inspects the Internet availability via both IPv6 and IPv4 protocols. [NDM-2348]

The RU/US country code substitution on the 5 GHz Wireless Network has been disabled as an outdated workaround. [SYS-613]

The new Transit requests option of the DNS profile allows profile-linked devices to resolve domain names via the DNS servers requested by the device instead of forcing the resolution via DNS servers specified in the profile. [NWI-1130]

The Software Network Accelerator now offloads IPv6 traffic, including MAP-T and DS-Lite IPv4 over IPv6 traffic, helping to reduce processor load and speed up traffic transfer. [SYS-611]

System and user-defined DNS profiles are now available for assignment from the content filtering profiles drop-down list, along with public DNS presets or commercial services, depending on your configuration. [NWI-1129]

Assigned unconditional priority to user-defined DNS profiles over public DNS presets and cloud DNS profiles. [NDM-2323]

The device schedule assignment is now applying as expected. [NWI-1306]

The subnet mask validator now acts appropriately with the 255.255.255.255 (/32) network mask. [NWI-1310]

Fixed the Use for accessing the Internet checkbox for WireGuard connections. [NWI-1319] [Forum topic]

The new Scan for networks feature provides detailed and graphical information about the networks in the air at the Wi-Fi monitor page. [NWI-1280]

Improved security: the DNS requests from blocked devices are now disabled via the DNS-proxy service of the KeeneticOS. [NDM-2321]

The empty Traffic Monitor page has been fixed. [NWI-1290] [Forum topic]

The button to import PPPoE-settings from previous routers now displays correctly in all the languages of the Web Interface. [NWI-1293]

The Enter button acts as the Next string action instead of the Save action during editing of the OpenVPN connection. [NWI-1286] [Forum topic]

The legend captions for the Spectrum analyser and Wi-Fi monitor have been corrected. [NWI-1285]

Fixed the font size of the IPsec VPN input fields in the Safari browser. [NWI-1287] [Forum topic]

The Huawei P40 Pro is once again able to connect to the Keenetic with a 160 MHz channel width. [SYS-601]

The OpenSSL library is updated to the latest version 1.1.1q, fixing the CVE-2022-2097 vulnerability. [NDM-2308]

The source IP address is appended to the HTTP/HTTPS server authentication failure message, providing advanced network maintenance information. The logging of failed authentication to the Web Interface is disabled by default. Use the following CLI command to enable: ip http log auth [NDM-2317]

Fixed the DNS proxy service error causing do_page_fault(): sending SIGSEGV error message in the System log. [SYS-592] [Forum topic]

USB modems of UsbQmi and UsbLte types now operate correctly on IPv6 connections. [NWI-1257] [Forum topic]

Fixed the OpenVPN service error causing enable extended error passing on TCP/UDP socket failed (IPV6_RECVERR) error message in the System log. [NDM-2304]

Fixed DoT (DNS over TLS) operation after reconnection of a PPPoE session. [NDM-2215]

The Logout button is visible now on mobile screens. [NWI-1243]

The message telling that the ISP is managing the Keenetic device appeared in the wrong context under certain conditions. [NWI-1246]

The Connection priority dropdown menu displays a correct list of connections. [NWI-1256] [Forum topic]

Restored DNS over TLS (DoT) operation with custom Domain setting. [NDM-2286]

The Download station Web UI is now more responsive when accessed via the KeenDNS domain. [NDM-2293]

Fixed the inability to upload files larger than 4 GBytes via the Web Interface File browser. [NDM-2300]

The new Proxy client is available now as a KeeneticOS system component providing Internet access via proxy servers using HTTP, HTTPS and SOCKS v5 protocols. [NDM-2195]

The following CLI commands are available to configure the Proxy client component:

The Proxy connection section is available in the Other connections menu for Internet access via HTTP/HTTPS/SOCKS5 proxy. [NWI-1108]

DS-Lite (IPv6 dual-stack lite) support is now available via automatic IPv4 over IPv6 provisioning, allowing access to IPv4-only enabled resources while the ISP provides a connection with the modern IPv6 protocol. [NDM-2060]

The new TCP/TLS port check mode enhances the Ping Check feature to provide verified protection against Internet access failures. This mode will prevent false-positive results if an ISP redirects traffic to a captive portal, for example, a billing service. [NDM-2094, NWI-1109]

Use the following CLI commands to set:

Or set up via the Web Interface for a required interface:

The new Wi-Fi monitor in the Status section provides a graphical utilization display for the Wi-Fi radio frequency channel currently in use. [NWI-1179]

Added support for the Alcatel MW70 — 4G LTE Cat7 — mobile router. [NDM-2246]

Added basic 5G mode support for the Telit FN980m — 5G and 4G LTE Cat20 — QMI-type modem module. [NDM-2260]

The new AT command terminal for UsbLte, and UsbQmi modems in the command-line interface (CLI) provides ultimate flexibility for additional modem statistics and configuration options. [NDM-2266]

Use the following CLI command:

For example, here are the results of two AT commands, ATI and AT+QTEMP, for the Quectel EP06-E modem as a UsbQmi0 modem interface.

Added configuration of the custom Web API password for ZTE CDC-type modems, which was introduced in the KeeneticOS 3.8 Alpha 2 version. [NDM-2198]

Improved security for SIP transport over TLS — the user may enable the TLS-certificates chain validation option in the Phone lines menu. [NDM-2229, NWI-1217, NWI-1105]

The new IPv4 over IPv6 provisioning section in the Other connections menu displays configuration details for the MAP-T and DS-lite protocols. [NWI-1106]

The OpenVPN service is updated to a new version, 2.6.0. [SYS-579]

Restored frequency band selector for 3G band choice of the QMI-type modems. [NDM-2288]

Renaming an Extender no longer causes unnecessary reconfiguration of the Wi-Fi System. [NWI-1188]

Fixed the TLS domain name and Domain fields mixing up in DNS configuration settings under certain conditions. [NWI-1222]

Restored the Speed limit saving for unregistered devices in the Device lists menu. [NWI-1239]

The DNS servers assigned by the ISP remain operatable when custom DNS servers are in use. [NDM-2265]

Keenetic mobile application no longer sends the alert about an empty administrator password after the initial setup. [SYS-583]